Product Center
Provide comprehensive testing products and services in the electromagnetic compatibility field
CLASSIFICATION
Promoting cutting-edge technology in China's electromagnetic compatibility field
Sales Managers
Director:135 0129 1848
Haoyu:138 1097 5355
Tianshu Li:139 1041 6374
Lulu Hui:185 1162 6597
Contact Us
4F.NO.15 building.Chaci District. Beijing.P.R China(100027)
+86 010-6435-7789
781920339@qq.com
Monday to Friday 8:00 to 16:30
Follow us
WeChat official account
coupling and decoupling networ
Type A coupling network is mainly used for the detection of the decoupling factor (DR) of the power absorbing clamp and the calibration measurement of the original calibration method of the absorbing clamp.
0
0
0
发布时间: 2023-01-05 16:50:16
ZN3752 Type A coupling network is a coaxial coupling and decoupling network. The production design of this product complies with the national standard of the People's Republic of China, GB/T6113-102, CISPR16-1-2.
Type A coupling network is mainly used for the detection of the decoupling factor (DR) of the power absorbing clamp and the calibration measurement of the original calibration method of the absorbing clamp. (See Figure 4-5)
The purpose of this coupling network is to provide a degree of immunity to the equipment under test (EUT) from environmental high-frequency disturbances, creating a repeatable environment for the measurement test setup.
The ZN3752 Type A coupling network can also be used to check the immunity of RF receivers. where sheath current is injected into the coaxial input. (Chapter 6 of GB/T6113.102CISPR 16-1-2 describes this test procedure)
1) Frequency range: 150kHz~30MHz
2) Port impedance: (Zce)=150Ω±20Ω
3) Phase angle: ≤±20°
4) Insertion loss: <0.8dB (see Figure 6)
5) Interference source signal port: maximum input signal 2W
6) Overall dimensions: length, width and height 191×160×100 (mm)
7) Instrument weight: 1.35kg